Model: 8008
The microphone: -60dB
Stereo channel input: -40dB
Aux output: -20dB
The effect: -20dB
The output: 4V biggest
The signal-to-noise ratio: -80dB
High frequency: ±15dB/10KHz
Intermediate frequency: ±15dB/250KHz-
Low frequency: ±15dB/60KHz
Channle：8ch
Power amplifier output：3000w*2
Total harmonic distortion：0.1% below （1KHX Full Power）
Power requirements: AC 220V 50Hz
Category: Sound Systems
Get A Quote
This is a basic package for general stage lighting. It consists of lighting truss up to 4 meters height and generally, it includes the following lights:
Two BSWs
Two Moving Wash RGBs
Two 4-Eye Blinders
4 Parcans/Par64
These lights can be customised as per the client's requirements.
Category: Stage Lighting
Get A Quote
The 12.4m jimmy jib can be setup as 12.4m, 10m and 7.6m.
It comes with U-shaped pan-tilt head which uses Japan motors and can bear payload of 20kgs.
Equipped with 10 inches monitor that can be connected through HDMI, SDI or VGA, this jib can be used by DV/DSLR/EX/professional and broadcast cameras. The tripod has 3 wheels and its height can be adjusted between 1.2m and 1.6m. The crane jib is also provided with a 4k camera and a lady crane operator for the event.
Category: Jib Cranes
Get A Quote
We offer high quality customised Gobo logo projections with heat resistant upto 500 Celsius. The lens can be customised in sizes as per the requirements.
Category: Gobo Lens Projection
Get A Quote
Stereo Power Output
8 ohm 1450W x 2
4 ohm 2025W x 2
2 ohm 2700W x 2
Bridged Power Output
8 ohm 4050W
4 ohm 5400W
Frequency Response (8 ohm) 20Hz-20kHz, -3dB @ 135kHz
Signal to Noise Ratio (S/N) > 80dB
Total Harmonic Distortion (THD+N, 80 Ohm, 1kHz) < 0.05%
Damping Factor (8 ohm, 1kHz) > 500
Slew Rate > 20V/us
Input Sensitivity 0.775V / 1.0V / 1.4V
Output Topology 3 Steps Class H
Connectors
Input 3-pin XLR / RCA / TRS
Output SEPAKON & Touch-Proof
Binding Posts
Power Supply AC 115V / 230V, 50-60Hz
Protection Features DC / Short / Temp / VHF / Limit / Soft Start
Dimensions 3U: 132mm (H) x 482mm (W) x 400mm (D)
Net Weight 45kg
Category: Sound Systems
Get A Quote
Frequency Range (-10 dB) 43 Hz - 20 kHz
Frequency Response (±3 dB) 53 Hz - 20 kHz
Coverage Pattern 75° x 50° nominal
Crossover Modes Bi-amp / passive, externally switchable
Crossover Frequency 1.2 kHz
Power Rating (Continuous / Program / Peak) Passive: 800 W / 1600 W / 3200 W
Bi-amp LF: 800 W / 1600 W / 3200 W
Bi-amp HF: 75 W / 150 W / 300 W
Maximum SPL 131 dB SPL peak
System Sensitivity (1W @ 1m) 96 dB
SPL (passive mode)
LF Driver 1 x JBL 2265H 15 in Differential Drive woofer with neodymium magnet and dual voice coils
HF Driver 1 x JBL 2431H 3 in voice-coil, neodymium magnet compression driver
Nominal Impedance Passive: 8 ohms
Enclosure Trapezoidal, 15 mm, 11-ply birch plywood
Suspension / Mounting Dual-angle (0° or -10°) 35 mm pole socket
Transport 2 x steel handles
Finish Black DuraFlex finish
Grille Powder-coated, black, 16-gauge perforated steel with acoustical transparent charcoal foam backing.
Removable JBL badge and punched JBL logo.
Input Connectors Neutrik Speakon NL-4 (x2)
Dimensions (H x W x D) 28 in x 17.3 in x 16 in
Net Weight 22KG
Category: Sound Systems
Get A Quote
The 10m jib crane can be setup as 10m, 7.6m and 5.2m. It comes with L-shaped pan-tilt head which use Japan motors and can bear payload of 10kgs. Equipped with 10 inches monitor that can be connected through HDMI, SDI or VGA, this jib can be used by DV/DSLR/EX/professional and broadcast cameras. The crane jib is also provided with a 4k camera and a lady crane operator for the event.
Category: Jib Cranes
Get A Quote
The 7.6m jib crane can be setup as 7.6m and 5.2m. It comes with L-shaped pan-tilt head which use Japan motors and can bear payload of 10kgs. Equipped with 10 inches monitor that can be connected through HDMI, SDI or VGA, this jib can be used by DV/DSLR/EX/professional and broadcast cameras. The crane jib is also provided with a 4k camera and a lady crane operator for the event.
Category: Jib Cranes
Get A Quote
Get exceptionally smooth cinematic shots from any desired angle with the Proaim 7.6m Camera Jib Crane kit, designed to meet your high-end production demands. The professional Crane package features a 7.6m Jib arm, a heavy-duty Jib Stand, a Pan-Tilt Head and a versatile floor dolly offering easy maneuvering and operations. It promises high performance and reliability with its high-grade aluminum built that supports up to 15kg/33lb. Made with High-Grade CNC Aluminum, the proaim 7.6m jib crane can be setup as 7.6m and 5.2m. It comes with L-shaped pan-tilt head which use Japan motors and can bear payload of 7.5kgs. Equipped with 10 inches monitor that can be connected through HDMI, SDI or VGA, this jib can be used by DV/DSLR/EX/professional and broadcast cameras. The crane jib is also provided with a 4k camera and a lady crane operator for the event.
Category: Jib Cranes
Get A Quote
4K Handheld Camcorder with all-new 1/3-type 3CMOS with 4K 50p/60p recording capability, 25x zoom lens and advanced Face Detection AF. The PXW-Z190 is the world’s first professional camcorder with a 4K (QFHD) 1/3-inch type sensor. Red, blue, and green light are independently captured by separate image sensors within the Exmor RTM system in 3840 x 2160 resolution at up to 60fps. Even if you’re delivering in HD, 4:2:2 10bit recordings will capture detail and image texture that HD sensors simply cannot see.
Category: Jib Cranes
Get A Quote
In general, the goal trusses consists of the following lights:
Four 4-Eye Blinders
Four BSWs
Four Moving Wash RGBs
Eight Parcans/Par64
These lights are in general and can be customised as per the client's requirements.
Category: Stage Lighting
Get A Quote